IPD Turbo Performance Camshaft -700/900 - Page 2

amaz'in · Dec 2nd, 2009, 22:37

Ok, I return form my garage...internal diameter is 2.5" I think the tailpipe is 3" but guess that's for cosmetic effect?

I guess 2.5" is still pretty decent?

J

davebslater(uk) · Dec 2nd, 2009, 22:45

2.5 will be ok , you can still have a 3 inch downpipe and cat tho .

my car is chipped just recently , and its no faster , in fact its worse at the moment .

the std ecu should cope with 1 bar of boost , just make sure you have fuel and listen for pinging , the chip of course will stop the nasty ping you get when going from open loop to closed loop .

amaz'in · Dec 2nd, 2009, 23:07

Hi Dave,

How much of the third world deficit is a 3" pipe and cat going to cost me? who/were do I go for such a thing? allegedly we have a good stainless exhaust man here near Norwich, what's it likely to cost?

Did you purchase Fred's chips? I hope you didn't get the Harry Ramsdens? Lol

Going to have to figure something out for the suspension, we had to fit 215 tyres instead of 205 to gain a tiny bit more ground clearance, it still grounds out on everything, including every level of the local Cinema car park the other night, I don't mind it chewing up my old rusty pipe, but a new stainless one would leave me feeling a bit pig sick.

It catches on the CAT, it's heat shield is already long gone, maybe it's just not fitted correctly, although it looks like it's been on there years?

J

CTCNetwork · Dec 2nd, 2009, 23:34

Hi,

Possibly interested in this... Damn... I'm turning into a parts magnet!

Des. . .

740T · Dec 2nd, 2009, 23:37

Hi Ryan,

Dropped you a PM earlier mate.

Cheers,
C

1stRaven · Dec 3rd, 2009, 08:30

All of the PM's have been responsed to and the cam has been provisional sold.

1stRaven · Dec 3rd, 2009, 12:54

Cam has now been sold.

Many thanks for your interest.

Cheers
Ryan

foggyjames · Dec 8th, 2009, 22:38

And it shipped out today...in possibly the most crazily oversized box for a cam I've ever seen. It originally housed an engine stand! Ryan's school of packaging is taking new students

cheers

James

amaz'in · Dec 8th, 2009, 23:01

Whoo hoo!....

Having picked up a second 940 sports today, I feel like my luck is flowing, having said that took the ammo for it's MOT,(ran out on 6th) but she failed...only on a rear wheel cylinder though, they had an XC90 in with a totally screwed braking system....damn Fords in disguise..:-)

Just twigged you guy's are both in Lincoln, I'm often passing through.

J

rogerthechorister · Dec 8th, 2009, 23:25

If the poster above is getting shot of sports rear Nivos and springs I might be in the market if they are any good. Nivos should pump up in about 100 yards.

If there are sport front springs and shocks in the pot too it adds seasoning!

Dec 2nd, 2009, 22:45	#12
davebslater(uk) redbollock guru Last Online: Jun 30th, 2016 23:54 Join Date: Jan 1970 Location: lincoln	2.5 will be ok , you can still have a 3 inch downpipe and cat tho . my car is chipped just recently , and its no faster , in fact its worse at the moment . the std ecu should cope with 1 bar of boost , just make sure you have fuel and listen for pinging , the chip of course will stop the nasty ping you get when going from open loop to closed loop . __________________ www.dbsmotorsport.co.uk

Dec 2nd, 2009, 23:07	#13
amaz'in Senior Member Last Online: Aug 2nd, 2022 10:46 Join Date: Nov 2006 Location: Norwich	Hi Dave, How much of the third world deficit is a 3" pipe and cat going to cost me? who/were do I go for such a thing? allegedly we have a good stainless exhaust man here near Norwich, what's it likely to cost? Did you purchase Fred's chips? I hope you didn't get the Harry Ramsdens? Lol Going to have to figure something out for the suspension, we had to fit 215 tyres instead of 205 to gain a tiny bit more ground clearance, it still grounds out on everything, including every level of the local Cinema car park the other night, I don't mind it chewing up my old rusty pipe, but a new stainless one would leave me feeling a bit pig sick. It catches on the CAT, it's heat shield is already long gone, maybe it's just not fitted correctly, although it looks like it's been on there years? J Last edited by amaz'in; Dec 2nd, 2009 at 23:30.

Dec 2nd, 2009, 23:34	#14
CTCNetwork Forum Support Team Join Date: Dec 2004 Location: Liège, Belgium View Photos By: CTCNetwork	Hi, Possibly interested in this... Damn... I'm turning into a parts magnet! Des. . . __________________ Density:- Not just a measurement ~ It's a whole way of Life.! ! ! I drive a Volvo, Please Don't Get In My Way! OldVolvos4Ever He shows up. People die. He vanishes. People should not be afraid of their governments. "He'll deliver more justice in a weekend than 10 years of your Governments should be afraid of their people... "V" courts & tribunals. Just stay out of his way." "I plan to."

Dec 3rd, 2009, 08:30	#16
1stRaven Forum Support Team Last Online: Mar 14th, 2018 13:07 Join Date: Mar 2006 Location: Lincoln View Photos By: 1stRaven	All of the PM's have been responsed to and the cam has been provisional sold. __________________ *700R Website*

Dec 3rd, 2009, 12:54	#17
1stRaven Forum Support Team Last Online: Mar 14th, 2018 13:07 Join Date: Mar 2006 Location: Lincoln View Photos By: 1stRaven	Cam has now been sold. Many thanks for your interest. Cheers Ryan __________________ *700R Website*

Dec 2nd, 2009, 22:37	#11
amaz'in Senior Member Last Online: Aug 2nd, 2022 10:46 Join Date: Nov 2006 Location: Norwich	Ok, I return form my garage...internal diameter is 2.5" I think the tailpipe is 3" but guess that's for cosmetic effect? I guess 2.5" is still pretty decent? J

Dec 2nd, 2009, 23:37	#15
740T Master Member Last Online: Apr 17th, 2024 17:02 Join Date: Sep 2006 Location: Glasgow View Photos By: 740T	Hi Ryan, Dropped you a PM earlier mate. Cheers, C

Dec 8th, 2009, 22:38	#18
foggyjames 300 Register Keeper Last Online: Today 01:27 Join Date: Dec 2001 Location: Nottingham	And it shipped out today...in possibly the most crazily oversized box for a cam I've ever seen. It originally housed an engine stand! Ryan's school of packaging is taking new students cheers James __________________ VOC 300-series Register Keeper '13 V70 D4 SE Lux '89 740 Turbo Intercooler '88 360 Turbo Intercooler '84 360 GLT '81 343 GLS R-Sport '79 343 DL '70 164

Dec 8th, 2009, 23:01	#19
amaz'in Senior Member Last Online: Aug 2nd, 2022 10:46 Join Date: Nov 2006 Location: Norwich	Whoo hoo!.... Having picked up a second 940 sports today, I feel like my luck is flowing, having said that took the ammo for it's MOT,(ran out on 6th) but she failed...only on a rear wheel cylinder though, they had an XC90 in with a totally screwed braking system....damn Fords in disguise..:-) Just twigged you guy's are both in Lincoln, I'm often passing through. J

Dec 8th, 2009, 23:25	#20
rogerthechorister Rogerthechorister Last Online: Dec 16th, 2023 02:15 Join Date: May 2006 Location: Rochester	Sports rear Nivos If the poster above is getting shot of sports rear Nivos and springs I might be in the market if they are any good. Nivos should pump up in about 100 yards. If there are sport front springs and shocks in the pot too it adds seasoning!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)