|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
v50 wont startViews : 845 Replies : 11Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 29th, 2018, 11:18 | #1 |
Junior Member
Last Online: Feb 24th, 2018 14:25
Join Date: Sep 2009
Location: leven
|
v50 wont start
hi I have a T5 AWD I moved the car 1/2 a mile last night.it never missed a beat , then it would turn over but not start and the same today
|
Jan 29th, 2018, 12:47 | #2 |
Senior Member
Last Online: Mar 23rd, 2024 18:41
Join Date: Mar 2017
Location: Aylesford, SarFeast
|
Accellorator pedal to the floor, crank the engine till it's starts when she does the revs will go sky high, don't be gentle, they don't like being moved short distances.
|
Jan 29th, 2018, 13:40 | #3 |
Junior Member
Last Online: Feb 24th, 2018 14:25
Join Date: Sep 2009
Location: leven
|
No codes stored . Help
|
Jan 29th, 2018, 16:06 | #4 |
WowIcanwriteAnythingHere!
Last Online: Mar 26th, 2024 16:05
Join Date: May 2016
Location: Dublin/Meath
|
Battery?
...in fairness you are not giving yourself a fighting chance in sorting out the issue, as you provided literally 1 line of text trying to sort out issue that may have possible solutions for few forum pages, sooooo..... you know... :>
__________________
2005 V50 T5AWD M66, Stage1 Hilton tune E-focus torque mount, E46 bi-xenon retrofit v2 , (also available in PDF form), DTSC fully-off mod, Brembo discs+ATE ceramic pads |
Jan 29th, 2018, 17:33 | #5 |
Dave
Last Online: Sep 7th, 2023 11:33
Join Date: Apr 2016
Location: East Yorkshire
|
Are you based in Leven, East Yorkshire?
You could have a dead starter motor, they can go without warning.
__________________
V50 D5 'Thor' |
Jan 29th, 2018, 22:16 | #6 |
Junior Member
Last Online: Feb 24th, 2018 14:25
Join Date: Sep 2009
Location: leven
|
No I stay in fife. We got the Aa guy out he reckons that it is the fule pump thanks guys
|
Feb 15th, 2018, 13:29 | #7 |
Junior Member
Last Online: Feb 24th, 2018 14:25
Join Date: Sep 2009
Location: leven
|
replaced the fule pump with a new1 there is no power at the pump a part from the fule pump control unit under the back seat .what else is in line to try
|
Feb 15th, 2018, 13:56 | #8 |
Volvo S40
Last Online: Yesterday 23:26
Join Date: Mar 2015
Location: Chichester
|
as LizardOfBodom has said, you checked the battery?
when you try start it can you hear anything? do you get any lights on the dash? a bit more info might help
__________________
----------------------------------------- Current: 2009 Volvo S40 T5 Progress Thread: https://www.volvoforums.org.uk/showthread.php?t=271945 Previous Volvo: 2008 S40 SE Lux R Design 2.0D |
Feb 15th, 2018, 14:04 | #9 |
Junior Member
Last Online: Feb 24th, 2018 14:25
Join Date: Sep 2009
Location: leven
|
it turns over normaly, there is just no power at the fule pump
|
Feb 15th, 2018, 14:23 | #10 |
WowIcanwriteAnythingHere!
Last Online: Mar 26th, 2024 16:05
Join Date: May 2016
Location: Dublin/Meath
|
It is possible the PEM is gone (pump electronic module) thats the box under the rear seats that has all wires going out of it and going to pump.
-did you check old pump if its working when 12v applied to it? -did you check the new pump with 12v to confirm its working? is it new Volvo unit or aftermarket or used one? - when you say there is no power going out to pump - did you check voltage on the wires going out of PEM to pump when trying to start the car? only then it would command the voltage out to pump. -did you do any more checks before you replaced fuel pump or just got new one on acount of "AA guy advice"? I was in similar position 2 months ago and I know its a very expensive and labour intensive procedure, in fact thats tha LAST thing fuel related you want to be gone on our AWDs. - VIDA or dealership is probably your best chance as only this software would allow you to pull PEM related codes or even trigger the fuel pump test
__________________
2005 V50 T5AWD M66, Stage1 Hilton tune E-focus torque mount, E46 bi-xenon retrofit v2 , (also available in PDF form), DTSC fully-off mod, Brembo discs+ATE ceramic pads Last edited by LizardOfBodom; Feb 15th, 2018 at 14:25. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|