|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
putting in an electric passenger seatViews : 613 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 16th, 2008, 11:54 | #1 |
VOC Member
|
putting in an electric passenger seat
how hard is it to change the passenger seat from manual to electric what im hopeing is that the wiring is already there and that all i have to do is buy the electric base of the seat and change it with the manual one thats in the car now so i dont need to replace the seat.
well thats the theory any one have any ideas as to the reality?? cheers Aidan |
Mar 16th, 2008, 11:58 | #2 |
Master Member
|
Hi "Car Mechanics" magazine put a set of leather electric seats into a 1998 V70. There was no existing wiring in the car ( unlike the older 940 cars ). They got the loom plug including some loom from the donor car and connected it to a suitable power source.
ivor940
__________________
96 940 2.3 SE LPT Estate 5 spd 171k ( off road due gearbox broken) 94 940 2.0 SE Turbo Estate 5 spd 180k (retd) 92 940 2.0 SE Turbo Estate 4 + o/d 166k (retd) |
Mar 16th, 2008, 12:03 | #3 | |
VOC Member
|
Quote:
dam i hope they decided to put it in in mine (its an 06) ive been looking at the wiring diagram and can see where it would be fed from if it was electric so i know where to wire it in to if i have to just didnt want to go pulling the car appart that much |
|
Mar 16th, 2008, 12:19 | #4 |
Master Member
Last Online: Oct 29th, 2018 11:16
Join Date: Apr 2007
Location: Chesterfield
|
when i looked at doing the 940 all that neaded doing was the loom ran from the fuse box to the seats but the motors had burned out in the drivers seat so didnt bother in the end with it
__________________
i kno im a dirty beastie sadley no longer rest in peace in volvo heaven NOTICE OF DISCLAIMER any information i give is soley on my own findings and mess ups |
Mar 16th, 2008, 16:06 | #5 |
Senior Member
Last Online: Sep 12th, 2019 23:23
Join Date: Sep 2007
Location: San Diego
|
Aidan,
On a 06 it is possible that the wiring is there , you will need more than the seat base ,you will have to get it complete to make it work , there is always the question as to if it will need software to marry it to the car. Mister T. |
Mar 16th, 2008, 19:02 | #6 | |
VOC Member
|
Quote:
bu**er thats prolly a bit more then im looking to spend |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|