V70: Electrical - back door lock failure

zuper · Dec 13th, 2017, 09:22

hi all,

the right back door does not work anymore.
had the issue of the lights not blinking when locking and narrowed down to this lock not locking.

I can manually lock/unlock it of course from the inside... but before taking it to have it fixed, is this an easy fix I can do myself?

any experience?

thanks!!

CTCNetwork · Dec 13th, 2017, 18:02

Hi,

Not necessarily. Depends on the year/model of your car.

It may be the motor or a component in the door lock unit.
Replacing the unit is not cheap and not so easy either. Fixing the motor is possible as it has been detailed in this forum.

Des. . .

zuper · Dec 14th, 2017, 11:18

2013 V70.
could not find the guide you specified but looking at some youtube videos...seems a bit too much for me

CTCNetwork · Dec 14th, 2017, 17:45

Hi,

Link to one topic Here.

Des. . .

zuper · Dec 15th, 2017, 10:30

thanks a lot...I wish I had the time and the knowledge to try that myself...

pepsimax · Dec 15th, 2017, 22:01

Hi,
Changed the motor in drivers door lock a while back on 2011P3, it was sticking sometimes and stopping alarm setting, bit of a pain as gotta take out glass and door handle then the whole panel comes off then its easy to get at(easier the second time). Used a FC280SC-20150 motor, cheap 5E did the job, lock seems to be faster now on that door. The only thing is disconnecting door module looses the up position settings on the window so the auto up doesn't work and need Vida to set this but doesn't show any errors.
There wasn't any grease/dirt in the motor but the brushes were worn out

Dec 13th, 2017, 09:22	#1
zuper New Member Last Online: May 24th, 2021 14:24 Join Date: Oct 2016 Location: London	back door lock failure hi all, the right back door does not work anymore. had the issue of the lights not blinking when locking and narrowed down to this lock not locking. I can manually lock/unlock it of course from the inside... but before taking it to have it fixed, is this an easy fix I can do myself? any experience? thanks!!

Dec 13th, 2017, 18:02	#2
CTCNetwork Forum Support Team Join Date: Dec 2004 Location: Liège, Belgium View Photos By: CTCNetwork	Hi, Not necessarily. Depends on the year/model of your car. It may be the motor or a component in the door lock unit. Replacing the unit is not cheap and not so easy either. Fixing the motor is possible as it has been detailed in this forum. Des. . . __________________ Density:- Not just a measurement ~ It's a whole way of Life.! ! ! I drive a Volvo, Please Don't Get In My Way! OldVolvos4Ever He shows up. People die. He vanishes. People should not be afraid of their governments. "He'll deliver more justice in a weekend than 10 years of your Governments should be afraid of their people... "V" courts & tribunals. Just stay out of his way." "I plan to."

Dec 14th, 2017, 17:45	#4
CTCNetwork Forum Support Team Join Date: Dec 2004 Location: Liège, Belgium View Photos By: CTCNetwork	Hi, Link to one topic Here. Des. . . __________________ Density:- Not just a measurement ~ It's a whole way of Life.! ! ! I drive a Volvo, Please Don't Get In My Way! OldVolvos4Ever He shows up. People die. He vanishes. People should not be afraid of their governments. "He'll deliver more justice in a weekend than 10 years of your Governments should be afraid of their people... "V" courts & tribunals. Just stay out of his way." "I plan to."

Dec 14th, 2017, 11:18	#3
zuper New Member Last Online: May 24th, 2021 14:24 Join Date: Oct 2016 Location: London	2013 V70. could not find the guide you specified but looking at some youtube videos...seems a bit too much for me

Dec 15th, 2017, 10:30	#5
zuper New Member Last Online: May 24th, 2021 14:24 Join Date: Oct 2016 Location: London	thanks a lot...I wish I had the time and the knowledge to try that myself...

Dec 15th, 2017, 22:01	#6
pepsimax New Member Last Online: Dec 15th, 2017 22:03 Join Date: Jun 2014 Location: dublin	Hi, Changed the motor in drivers door lock a while back on 2011P3, it was sticking sometimes and stopping alarm setting, bit of a pain as gotta take out glass and door handle then the whole panel comes off then its easy to get at(easier the second time). Used a FC280SC-20150 motor, cheap 5E did the job, lock seems to be faster now on that door. The only thing is disconnecting door module looses the up position settings on the window so the auto up doesn't work and need Vida to set this but doesn't show any errors. There wasn't any grease/dirt in the motor but the brushes were worn out

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)