|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
How's this for bad workmanship?Views : 2018 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 26th, 2010, 20:44 | #1 |
Master Member
Last Online: Mar 10th, 2023 13:03
Join Date: Mar 2010
Location: Sheffield
|
How's this for bad workmanship?
Here's a picture of the alternator I've just removed. I'd noticed the thing was wobbling and rattling a bit, but when I looked at from underneath I noticed the lug was cracked. And why? Because whoever fitted it didn't have a long enough bolt, so they hacksawed half the lug off to get it on and weakened the casting. As it's been wobbling it's also stripped half the thread. AND it appears they haven't wired it through a charge regulator, so ever since I've had it I've been boiling the battery every day. Consequence: I have a perfectly functioning alternator that's going for scrap, I need a new one at £130 and I'll probably need a new battery very soon too.
I imagine this was the same cowboy who used heat and (I assume) a basic puller to get a brake drum off, relined the shoes and then put the same oval drum back on, then gave it an MOT (probably on the logic that it was an old car that did 50 miles a year so it didn't matter). That cost me money too. Rant over.
__________________
1967 Volvo 121 Auto in everyday use and rolling restoration. 2002 Audi TT quattro. (Sorry!) |
Jun 26th, 2010, 20:49 | #2 | |
.
Last Online: Jul 14th, 2013 14:28
Join Date: Dec 2009
Location: MK
|
It may be worth asking if someone has a broken alternator. It isn't hard to swap the front housing over. If it is one of the new ones on the market the regulator is internal, the original Volvo ones are external.
Quote:
|
|
Jun 26th, 2010, 22:43 | #3 |
Master Member
Last Online: Nov 29th, 2020 00:42
Join Date: Feb 2010
Location: Newton Abbot
|
Would it be possible to get it aluminium welded then get it rethreaded, i know on my truck we reweld allsorts of things that you think you wouldn't get away with.
|
Jun 27th, 2010, 01:32 | #4 |
Premier Member
Last Online: Today 00:11
Join Date: Jul 2007
Location: Connecticut, USA
|
Woodman;
I believe that is a failure of the classic quick and dirty alternator conversion where the housing was unceremonially modified (by weakening it, as you can see) so that it is not necessary to install an adapter...one option is to locate an unmolested housing from a junk alt with which to repair that alt. then reinstall with an appropriate bracket (IPD for Bosch SW-EM for Delco)...as far as absence of Regulator, other poster has already touched on the possible answer: internal regulator ...if you post some pictures of the rear contact area, forum should be able to help further identifying the alt. I also request permission to republish your pic to show what a bad idea the quick and dirty non-bracket mounting method is. Cheers from Connecticut! |
Jun 27th, 2010, 09:23 | #5 |
VOC Member
Last Online: Apr 18th, 2024 17:06
Join Date: Jul 2006
Location: Chatham
|
Am I missing something, why is this hole threaded? An alternator isn't "fixed" and should have smooth holes to allow it to be pivoted on the mounting and adjustment bolts.
|
Jun 27th, 2010, 10:45 | #6 |
VOC Member
Last Online: Yesterday 09:26
Join Date: Jan 2006
Location: Bedford
|
My alternator has a threaded upper mount (where the belt tensioner is) to allow you just to use a bolt through the tensioner bracket - the thread allows the alternator to tighten against the bracket without using a nut. I suppose it saves using two spanners when you want to remove it, that's the only benefit.
My dynamo suffered in the same way with a cracked lower mount, I don't know why though. |
Jun 27th, 2010, 12:33 | #7 |
Premier Member
Last Online: Today 00:11
Join Date: Jul 2007
Location: Connecticut, USA
|
Derek;
You are right of course...I believe that is just remaining evidence, that the pivot bolt was threaded where it went through the housing and vibrated against the inside wall cutting its threads into it...if I look carefully at the threads, the threads look like they are not even in-line with the alt armature...just more evidence of shoddy design and workmanship...the person who did that should maybe stick to video games! dgbalfour; Cracked housings are inevitably a result of vibration which occurs with sloppy mounting...even with an unmolested housing this can occur...alternators are meant to be pivoted in order to tension belt, the LOCKED in place...at the pivot and tensioning bar...if there is relative movement of any kind, something WILL eventually fatigue and break as a result... Cheers |
Jun 27th, 2010, 14:01 | #8 | |
Master Member
Last Online: Mar 10th, 2023 13:03
Join Date: Mar 2010
Location: Sheffield
|
Quote:
Yep, neither the saw cut nor the threaded hole are true to the armature. Bloody hell! I'm thinking the best use of the old alt is to see if someone wants its innards to recon an equivalent unit. I'll be happier (if poorer) with a new 55amp one with a built-in regulator. Thanks everyone for your suggestions and for letting me let off steam about crap workmanship!
__________________
1967 Volvo 121 Auto in everyday use and rolling restoration. 2002 Audi TT quattro. (Sorry!) |
|
Jun 29th, 2010, 20:30 | #9 |
Senior Member
Last Online: Nov 14th, 2016 01:07
Join Date: Feb 2007
Location: essex
|
i have a recon 35 amp external reg' alternator if its any use,
pm me if you are interested |
Jun 29th, 2010, 20:52 | #10 |
Master Member
Last Online: Mar 10th, 2023 13:03
Join Date: Mar 2010
Location: Sheffield
|
Thanks but I have a shiny new alternator now.
__________________
1967 Volvo 121 Auto in everyday use and rolling restoration. 2002 Audi TT quattro. (Sorry!) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|