Strut Brace Bushes

[wise old monkey]

Originally Posted by davebb

Hi so how does it work?
has it got a spring weight in it that removes the resonance of the vibration ?
how does your car feel now you have poly bushed the rear subframe,
also you asked about the braces, I still have not fitted my lower rear one but I will do very soon and I now have ordered the lower front brace, it should be here with in a week,

I found this on R forum and they said it transformed the car,

http://forums.swedespeed.com/showthr...-Braces-Review

Dave

i opened it up, it looks like a lead cube inside a rubber coating, also the engine seems quieter

[davebb]

ok thanks for the info ,
so have you mounted it different than it is in the ebay photo,
Thanks Dave

[wise old monkey]

Yes. If you look at my picture i have turned it around so the block is behind the bush towards the bulk head

[davebb]

Hi yes that makes good sense is that how Volvo had it?
Dave

[wise old monkey]

No. They put it on the rear bush but against the side bar between the two bushes

[davebb]

OK thanks ,
I will post back once I have it fitted
Thanks Dave

[wise old monkey]

When you fit it. It will be against two metal pipes. I just pushed the intowards the bulkhead so they dont touch

[davebb]

OK thanks,

So How is you're car now you polybushed your backend
Of the car, now you sortied out the problems you had,
Dave

[wise old monkey]

still needs a proper alignment, both rear tyres are wearing on the outer edges

[davebb]

ok Should be good when you have it all done,
Dave