|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
No beep when roof operatedViews : 693 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 20th, 2013, 20:41 | #1 |
Premier Member
Last Online: Mar 21st, 2024 21:39
Join Date: Oct 2011
Location: Sevenoaks
|
No beep when roof operated
Hi all,
The manual for my C70 says the windows should drop slightly while operating the roof and there should be a beep or chime when the roof has finished opening or closing, mine does neither. The roof seems to be working fine, and I've only closed it once when the windows were all down but I'm pretty sure the windows all came up when the roof had finished. Is this something to worry about and if it is wrong any ideas what I should be looking for? Thanks
__________________
1999 V70 TDi (auto) 2002 C70 T5 GT Convertible (manual) 2008 XC90 D5 Executive (auto) |
Apr 20th, 2013, 21:06 | #2 |
Junior Member
Last Online: Jun 16th, 2017 22:11
Join Date: Apr 2006
Location: sheffield
|
bleep
the bleep on mine is very quiet, you might miss it!
|
The Following User Says Thank You to chris c70 t5 For This Useful Post: |
Apr 20th, 2013, 22:04 | #3 |
Premier Member
Last Online: Mar 21st, 2024 21:39
Join Date: Oct 2011
Location: Sevenoaks
|
Next time I try it I will listen a bit harder then, although I am pretty sure there is no beep. It doesn't beep if you open the door and you've left the side lights on either. Our V70 beeps if you do that so I would have expected this to as well, could that be linked at all? Presumably there is a little speaker somewhere for the beeps, anyone know where that is so I can investigate further if needed?
__________________
1999 V70 TDi (auto) 2002 C70 T5 GT Convertible (manual) 2008 XC90 D5 Executive (auto) |
Apr 20th, 2013, 22:46 | #4 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
the c70 wont beep if the lights are on and the door opened with ignition off or on as none of the classic X70 series have that function out the factory
|
Apr 20th, 2013, 23:50 | #5 | |
Premier Member
Last Online: Mar 21st, 2024 21:39
Join Date: Oct 2011
Location: Sevenoaks
|
Quote:
I'm really bad for leaving lights on, I'll have to watch it or I'll be stuck somewhere with a flat battery!
__________________
1999 V70 TDi (auto) 2002 C70 T5 GT Convertible (manual) 2008 XC90 D5 Executive (auto) |
|
Apr 21st, 2013, 09:29 | #6 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
As long as you leave the lights on permanently as soon as you remove the key the lights will go off its only when there on the 1st click they will stay on with the ignition off.
|
The Following User Says Thank You to Thanatos For This Useful Post: |
Apr 21st, 2013, 09:38 | #7 |
Premier Member
Last Online: Mar 21st, 2024 21:39
Join Date: Oct 2011
Location: Sevenoaks
|
As long as I get into the habit of not using side lights then I should be alright, either off completely or straight to dipped headlights
__________________
1999 V70 TDi (auto) 2002 C70 T5 GT Convertible (manual) 2008 XC90 D5 Executive (auto) |
Apr 21st, 2013, 09:42 | #8 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
Yeah if you want to turn the headlights off to keep the silver good and use the side lights as drl you can remove a couple of wires from the switch and it will use the side lights as drl's whilst the switch is in the off position so you never have to use that on the switch.
|
The Following User Says Thank You to Thanatos For This Useful Post: |
Apr 21st, 2013, 10:01 | #9 |
Premier Member
Last Online: Mar 21st, 2024 21:39
Join Date: Oct 2011
Location: Sevenoaks
|
That is definitely something I would be interested in! Just did a quick search and it says all you have to do is cut one of the wires behine the switch, is it really as easy as that? If it is then time to order some side light led bulbs and get the wire cutters out!
__________________
1999 V70 TDi (auto) 2002 C70 T5 GT Convertible (manual) 2008 XC90 D5 Executive (auto) |
Apr 21st, 2013, 10:02 | #10 |
VOC Member
Last Online: Sep 11th, 2019 14:36
Join Date: Aug 2008
Location: Blackpool
|
This should work
To disable the headlights and leave just the side lights working which will switch on/ off with the ignition with the Master lighting switch in the 0 position you need to lever out the light switch, locate pin 5 which should have a Green and Red wire in it, cut this wire about 2" from the connector and tape up both ends. Headlights are only switched ON when the Master light switch is set to ON, Sidelights will come on and off with the ignition switch and Sidelights are still available with the switch in the mid position should you want to leave the car with parking lights illumninated. NOTE when you flash the lights with the indicator stalk ONLY the HI beams will illuminate. To enable dash lighting at all times lever out the Master lighting switch, locate pin 8 which should have a White and Black wire in it, cut this wire about 2" from the connector and tape up both ends, ALL your dash lights including switches and heater control panel will be illumninated at all times the ignition switch is on. If you ever want to return the car to standard simply use "Choc-Block" to join the wires together |
The Following User Says Thank You to Thanatos For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|