|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
2011 v70 214bhp diesel no powerViews : 623 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 24th, 2021, 18:12 | #1 |
Member
Last Online: Feb 8th, 2022 21:01
Join Date: Oct 2016
Location: durham
|
2011 v70 214bhp diesel no power
i've just had my DPF cleaned and is now refitted reset the adaptations in vida but car feels exactly the same totally flat as though there is no turbo, its now showing a throttle body error
P210000 throttle actuator A control motor circuit/open P2622200 throttle position output circuit high i tried checking the live data for the turbo but to be honest i'm not really sure what I'm looking for ,the desired boost pressure and the actual boost pressure both rise together as the car is revved so i'm assuming that means the turbo is working, there's a reading for turbo control valve, bypass or VNT that reads 40% and also turbo control valve wastegate that is on a 100% neither change with revs, could this be related to a throttle body fault. |
Nov 24th, 2021, 19:58 | #2 | |
Premier Member
Last Online: Today 17:17
Join Date: Jul 2012
Location: Lenzie
|
Quote:
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 |
|
Nov 24th, 2021, 20:31 | #3 |
Member
Last Online: Feb 8th, 2022 21:01
Join Date: Oct 2016
Location: durham
|
car has 84k full dealer history , i've not changed anything yet apart from getting the DPF cleaned which was blocked.
I've read on other forums that a failed throttle body can stop a DPF from regenerating so maybe this has been the fault. Last edited by sole27; Nov 24th, 2021 at 21:20. |
Nov 24th, 2021, 21:58 | #4 | |
Premier Member
Last Online: Today 17:17
Join Date: Jul 2012
Location: Lenzie
|
Quote:
Apologies but I meant to say cleaned the Inlet Manifold pressure sensor in my earlier post
__________________
V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990 |
|
Nov 25th, 2021, 11:03 | #5 |
Member
Last Online: Feb 8th, 2022 21:01
Join Date: Oct 2016
Location: durham
|
just removed the throttle body and it's pretty clean inside very little carbon ,cleaned it anyway, removed the top and expected to find a stripped cog but no they are all in perfect condition, tested the operation by applying power to pins 1 and 4 and closes fine so not sure why i'm getting a throttle body error
|
Nov 25th, 2021, 20:42 | #6 |
Member
Last Online: Feb 8th, 2022 21:01
Join Date: Oct 2016
Location: durham
|
car seems to be sorted checked the operation of the throttle body in vida and seemed to open and close ok, reset the adaptations and the code has gone and it's out of limp mode, just need to keep a check that the DPF regenerates when needed
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|