P Reg 940 Turbo breaking - Page 4

Drempel · Oct 14th, 2018, 17:04

Thanks tofufi

So that would be:
- Throttle spindle
- Brackets for switches
- switches
- CC module
- Pump
- Indicator stalk

I think that should be it.

I found this Photo

tofufi · Oct 14th, 2018, 17:53

Ironically, that photo doesn't have the little aluminium brackets that hold the pedal switches. On the donor car they will need to have the mounting rivets drilled out to free them

I can't identify the thing just above the pedal switch in the photo, but that might be as mine has the earlier relay which has fewer wires.

How much would I love one of those cruise control stickers

Drempel · Oct 14th, 2018, 19:24

I'd want the sticker as well.
Shouldn't be to hard to make up...

Wouldn't you be able to take the signal from the brake pedal switch?

240ratrod · Oct 16th, 2018, 08:26

I have all those pieces.
Some off the car but most still on in their various locations.

What is a kit like this worth is the next question?

Hollick · Oct 17th, 2018, 17:03

Is your 940 the high pressure turbo B230FT engine? I need the in tank high pressure fuel pump which is combined with the gauge sender - it should have a red sleeved four wire connecting lead from the loom in the nearside rear corner locker, access to the pump a plate under the platform extension piece behind the rear seat when folded forward. Mine is the 1996 940 Classic estate Hollick

Drempel · Oct 17th, 2018, 22:35

Quote:

Originally Posted by 240ratrod

I have all those pieces.
Some off the car but most still on in their various locations.

What is a kit like this worth is the next question?

I don't know what the kits usually go for. I have seen new ones being sold for 150... But if you do some googling you'll find some answers.

I'm interested in it!

240ratrod · Oct 20th, 2018, 10:17

I might be using the pump as part of my b230ft swap. I don't know yet sorry!

Penybryn · Oct 27th, 2018, 17:50

Have you got a good passenger side headlamp available?

827Roverman · Nov 3rd, 2018, 15:59

Quote:

Originally Posted by 827Roverman

many thanks matt for the gear shifter, looking forward to its arrival, then just need to find out how to do the swop over.

Many thanks Matt, its now fitted and working ok. David

tofufi · Nov 3rd, 2018, 18:30

240ratrod, I've sent you a PM about a plastic trim piece

Oct 14th, 2018, 19:24	#33
Drempel New Member Last Online: Yesterday 11:47 Join Date: Sep 2018 Location: Edinburgh	I'd want the sticker as well. Shouldn't be to hard to make up... Wouldn't you be able to take the signal from the brake pedal switch? Last edited by Drempel; Oct 14th, 2018 at 19:27.

Oct 16th, 2018, 08:26	#34
240ratrod Junior Member Last Online: Nov 8th, 2020 11:22 Join Date: Oct 2018 Location: Nottingham	I have all those pieces. Some off the car but most still on in their various locations. What is a kit like this worth is the next question? __________________ 1984 240 2.3 turbo

Oct 20th, 2018, 10:17	#37
240ratrod Junior Member Last Online: Nov 8th, 2020 11:22 Join Date: Oct 2018 Location: Nottingham	I might be using the pump as part of my b230ft swap. I don't know yet sorry! __________________ 1984 240 2.3 turbo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Oct 14th, 2018, 17:04	#31
Drempel New Member Last Online: Yesterday 11:47 Join Date: Sep 2018 Location: Edinburgh	Thanks tofufi So that would be: - Throttle spindle - Brackets for switches - switches - CC module - Pump - Indicator stalk I think that should be it. I found this Photo

Oct 14th, 2018, 17:53	#32
tofufi Premier Member Last Online: Today 14:18 Join Date: Sep 2014 Location: Bristol	Ironically, that photo doesn't have the little aluminium brackets that hold the pedal switches. On the donor car they will need to have the mounting rivets drilled out to free them I can't identify the thing just above the pedal switch in the photo, but that might be as mine has the earlier relay which has fewer wires. How much would I love one of those cruise control stickers

Oct 17th, 2018, 17:03	#35
Hollick Douglas Hollick Last Online: Oct 26th, 2018 16:20 Join Date: Mar 2014 Location: Grantham	Is your 940 the high pressure turbo B230FT engine? I need the in tank high pressure fuel pump which is combined with the gauge sender - it should have a red sleeved four wire connecting lead from the loom in the nearside rear corner locker, access to the pump a plate under the platform extension piece behind the rear seat when folded forward. Mine is the 1996 940 Classic estate Hollick

Oct 27th, 2018, 17:50	#38
Penybryn Junior Member Last Online: Mar 9th, 2024 15:34 Join Date: Jan 2007 Location: Aberdare	Have you got a good passenger side headlamp available?

Nov 3rd, 2018, 18:30	#40
tofufi Premier Member Last Online: Today 14:18 Join Date: Sep 2014 Location: Bristol	240ratrod, I've sent you a PM about a plastic trim piece

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)