|
200 Series General Forum for the Volvo 240 and 260 cars |
![]() |
|
Adjustable Clutch Pushrod.. Can they be fitted?Views : 836 Replies : 5Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Jun 17th, 2024 11:04
Join Date: Sep 2018
Location: Harrogate
|
![]()
My master clutch cylinder yoke is badly worn onto an oval hole. Instead of replacing the whole thing, can you just replace the pushrod with an adjustable one, or even a standard one?
These holes are elongated and give me travel before clutch engages: ![]() Adjustable one: ![]() |
![]() |
![]() |
![]() |
#2 |
Trader Volvo in my veins
Last Online: Yesterday 22:45
Join Date: Dec 2004
Location: Anglesey
|
![]()
That should work provided the ball profile is close enough to the same
|
![]() |
![]() |
![]() |
#3 |
Master Member
Last Online: Yesterday 08:54
Join Date: Nov 2012
Location: London and Cambridge
|
![]()
Or you can weld a washer on each side in the correct place for the pin and use a slightly longer pin.
Cheers |
![]() |
![]() |
The Following User Says Thank You to Bugjam1999 For This Useful Post: |
![]() |
#4 |
Member
Last Online: Jun 17th, 2024 11:04
Join Date: Sep 2018
Location: Harrogate
|
![]()
Yeah I saw that solution and it is a good one. However I have no welding equipment (yet), a mate is gifting me his old MIG, so will happily have a play when I do.
Last edited by Big 240; Jan 17th, 2023 at 08:47. |
![]() |
![]() |
The Following User Says Thank You to Big 240 For This Useful Post: |
![]() |
#5 |
Member
Last Online: Jun 17th, 2024 11:04
Join Date: Sep 2018
Location: Harrogate
|
![]()
Sorry I moved the images and it messed up the initial post, so I've added below:
My master clutch cylinder yoke is badly worn onto an oval hole. Instead of replacing the whole thing, can you just replace the pushrod with an adjustable one, or even a standard one? These holes are elongated and give me travel before clutch engages: ![]() Adjustable rod: ![]() |
![]() |
![]() |
The Following User Says Thank You to Big 240 For This Useful Post: |
![]() |
#6 |
Member
Last Online: Jun 17th, 2024 11:04
Join Date: Sep 2018
Location: Harrogate
|
![]()
Just as an update
I fitted an adjustable rod and all works perfectly. I did a little thread here: https://www.volvoforums.org.uk/showthread.php?t=330541 |
![]() |
![]() |
The Following 5 Users Say Thank You to Big 240 For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|