V70 Body/Trim: Fuel door lock screws

[pmcatominey]

Hi,

Does anyone know where I can find the part number or specs for the two screws which secure the fuel door lock to the body.

The parts diagram in VIDA, attached, doesn't list them, I'm not sure if that means they will be listed elsewhere.

[paddy74]

If you're talking about #19, that's because there aren't any. I have no idea how they are called, but here's a video about it. It's actually very simple.

https://www.youtube.com/watch?v=UHclva8_OiI

[ASt85]

Originally Posted by pmcatominey

Hi,

Does anyone know where I can find the part number or specs for the two screws which secure the fuel door lock to the body.

The parts diagram in VIDA, attached, doesn't list them, I'm not sure if that means they will be listed elsewhere.

They are plastic push pins/head-less rivets and should come supplied with the hinge. If your replacement hinge doesn't come with pins, push the existing ones through GENTLY and they will drop out into the cargo area side-well they can then be reused. Make sure you stuff a towel or have got something in place in the well to stop them disappearing into the crevices....they are very difficult to hold in confined spaces!

[pmcatominey]

I'm talking about the screws which hold the lock in place, not the hinge/door.

They go into the top left of the filler recess, and into the lock in the two holes by the number 17 mark.

[ASt85]

Originally Posted by pmcatominey

I'm talking about the screws which hold the lock in place, not the hinge/door.

They go into the top left of the filler recess, and into the lock in the two holes by the number 17 mark.

Ah - They are 2 x size 2.0 Torx screws. I posted a "how to" repair the lock in this thread at post 5
https://www.volvoforums.org.uk/showthread.php?t=143888 for a how to repair
There are a number of similar posts on the site. It all depends whether you choose to remove the rear cargo area side panel to get easy access to all the solenoid parts etc.

[pmcatominey]

Thanks!