|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
SadViews : 20976 Replies : 191Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 12th, 2013, 22:59 | #11 |
VOC Member
Last Online: Nov 6th, 2016 10:18
Join Date: May 2009
Location: Blackpool UK
|
See if you can borrow (or hire) an endoscope, send that down through the hole left when you take out a spark plug and have a look around inside each combustion chamber, you will be able to see what you going to be dealing with before you pull the head off the engine, a steerable one should be able to go down and look back up at the underside of the valves - Mike
|
Nov 13th, 2013, 07:57 | #12 |
Master Member
Last Online: Mar 24th, 2024 19:17
Join Date: Oct 2013
Location: Leeds
|
As stephend said get a decent torque wrench and plenty of tools, also from experience and especially if you don't know what your doing, take pictures and have the ability on hand to sort what you take off especially the nuts and bolts!
I did my first one at age 16 on the Lancia Y10 mum mum gave me that had no compression, ended up taking the engine out and have never looked back, even got me into working as a Formula Ford Race mechanic for a while. Its essentially quite easy on paper, perhaps buy a Haynes Manual first and read it over several times. I am new to this Forum but there seem to be a lot of knowledgeable people here and its very friendly so i am sure you will get any advice you need. Take it steady, try not to get frustrated and watch those knuckles and it will be fine! |
Nov 13th, 2013, 21:39 | #13 |
VOC Member
Last Online: Apr 4th, 2023 18:13
Join Date: Apr 2010
Location: Oxford
|
Thanks guys.
I'm quite pleased to find that I'd already thought of all the things you mention bar the endoscope. Perhaps I'm not completely hopeless after all. That's right - no VVT on mine. Can't say that Haynes seems especially easy to follow but I'm hoping that it'll make more sense when I'm actually looking at the engine. And if I go slowly and ask for help when I get stuck... what can possibly go wrong?!! No particular start date in mind yet, but you'll probably know about it quite soon, once I get going, if I do... I have storage space but no proper shelter - something else I'd already thought of. Might be able to rig something up...
__________________
(Formerly) 1988 745 B230K (Phoenix) Last edited by DWM; Nov 13th, 2013 at 21:44. |
Nov 13th, 2013, 23:33 | #14 |
Premier Member
|
Not even a car port or anything...?
Edit: another strategy you might think about is that if you do the donkey work of stripping down and getting the head off, your trusted mechanic friend might sort out the valve for you (if that is indeed what the problem is), saving you a lot on the overall repair costs and giving you extra peace of mind.
__________________
1989 740 GL 2.0 estate 2000 V40 2.0 (gone) 2005 Toyota Avensis 2.0 estate (gone) 2012 Ford Mondeo 2.2 TDCi estate 1999 Land Rover Discovery 2 TD5 Last edited by stephend; Nov 13th, 2013 at 23:37. |
The Following User Says Thank You to stephend For This Useful Post: |
Nov 14th, 2013, 07:48 | #15 |
Forum Support Team
Last Online: Nov 28th, 2022 17:33
Join Date: Jan 2009
Location: Here.... obviously!
|
If you do decide to strip it down, good luck with it. Will be a fantastic opputunity to learn more about your car.
|
The Following User Says Thank You to tt82 For This Useful Post: |
Nov 14th, 2013, 08:39 | #16 | |
VOC Member
Last Online: Apr 4th, 2023 18:13
Join Date: Apr 2010
Location: Oxford
|
Quote:
__________________
(Formerly) 1988 745 B230K (Phoenix) |
|
Nov 14th, 2013, 09:45 | #17 |
VOC Member
Last Online: Jun 20th, 2022 14:32
Join Date: Oct 2009
Location: Upminster
|
I'm pretty sure that you are tech savvy and that you have common sense about you.
if you have done a cambelt before, then you will find this job just as easy. go to post 36 here http://www.volvoforums.org.uk/showth...=161064&page=4 its not as intimidating as it looks, everything is fixable if you have the guts to do it and get over that initial "what if" factor. this was the first time i had done anything like this in this much detail on any motor for myself, it took me half a day and the longest bit - changing the cambelt.
__________________
what good music deserves is full deep bass to give it warmth. the stock volvo sub works....just at high volumes Drum n Bass and dubstep |
The Following User Says Thank You to Anadinolin For This Useful Post: |
Nov 14th, 2013, 20:26 | #18 |
VOC Member
Last Online: Apr 4th, 2023 18:13
Join Date: Apr 2010
Location: Oxford
|
Thank you for the compliment.
No, never done a cambelt. For me, this would definitely represent the significant step up from fiddling with the trim a bit to actually doing something to an engine! Anyway I'm still nowhere with it. Haven't ordered any bits or started to sort myself out properly, so the original plan to make some progress this weekend seems to be slipping a bit. Never mind. Might yet get somewhere.
__________________
(Formerly) 1988 745 B230K (Phoenix) Last edited by DWM; Nov 14th, 2013 at 22:43. |
Nov 14th, 2013, 23:16 | #19 | |
Premier Member
|
Quote:
Cambelts: I'd never done a cambelt until I did one, and I'd never done a head gasket until I did one. I admit I haven't attempted a cambelt on a twin-cam transverse engine...!
__________________
1989 740 GL 2.0 estate 2000 V40 2.0 (gone) 2005 Toyota Avensis 2.0 estate (gone) 2012 Ford Mondeo 2.2 TDCi estate 1999 Land Rover Discovery 2 TD5 |
|
The Following User Says Thank You to stephend For This Useful Post: |
Nov 15th, 2013, 09:02 | #20 |
Premier Member
Last Online: Nov 15th, 2022 21:34
Join Date: Apr 2010
Location: London / Essex
|
Not sure if you have access to VIDA, but if not, feel free to let me know what you need and I can upload whatever you need.
__________________
Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba
|
The Following User Says Thank You to gatos For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|