|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
T5 head bolt torque settings PleaseViews : 5332 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 11th, 2011, 23:36 | #1 |
Swedish Auto Parts
Last Online: Oct 25th, 2020 23:42
Join Date: Feb 2009
Location: portsmouth
|
T5 head bolt torque settings Please
Does anyone have the torque settings for the 850 t5 please I need it in NM and ft lb if possible.
Thanks in advance :-)
__________________
Visit our website www.swedishautoparts.co.uk Or Call us on 02392179161 |
May 13th, 2011, 22:04 | #2 |
ba baracus...
Last Online: May 30th, 2023 12:30
Join Date: Dec 2008
Location: chichester west sussex
|
nip in to halifords haynes manual..........just rip out the page lol
__________________
i aint getting on no plane............. |
May 15th, 2011, 13:05 | #3 |
Premier Member
Last Online: Apr 20th, 2024 19:38
Join Date: Dec 2002
Location: Renfrewshire
|
http://www.volvoforums.org.uk/showthread.php?t=124593
On the next link there is a reference to head torque settings which are wrong in certain Hynes Manuals. You will have to read through it to find the it. http://www.tracystruesoaps.com/tutorials/850hg/p1.html
__________________
Tek-Emo Villis Emo Bis V70 SE NAV 1.6 D2 2015MY POWERSHIFT, D4162T, 93000miles, RED. /VOL FCR/PEPER OBD2/Acron 9135 OBD2/L.E.D Flasher/VDASH/ANCEL BA301/Topdon Top Scan Last edited by ShadeTek; May 15th, 2011 at 13:09. |
May 15th, 2011, 13:11 | #4 |
Premier Member
Last Online: Apr 20th, 2024 19:38
Join Date: Dec 2002
Location: Renfrewshire
|
Here is the line.
Using the sequence above (that starts in the middle of the head), torque all the head bolts to 15 ft/lb. Once you have finished, repeat the sequence and torque them to 44 ft/lb this time. NOTE - if you have a US Haynes manual that states the second torque should be 37 ft/lb (as mine does), it is INCORRECT. I also had a British Haynes manual and a Volvo factory manual to refer to, and both of them gave a Nm value that converted to 44 ft/lb. I further researched and found from another source online (AERA page 116, second line, last column on the right) that the second torque should be 44 ft/lb. I have communicated with Haynes and notified them of the error, and they agreed. So, torque to 15 ft/lb the first time through the sequence, and 44 ft/lb the second time through it. The third and final torque is the one that is a nail-biter, and it is done with a torque angle gauge (above). This is basically a short 1/2" drive extension with a dial around it showing degree measurements (0-360). It has an arm that protrudes from a bracket on the dial so it doesn't move, while the clear cover on top of it has an indicator line that shows exactly how much you have tightened (in degrees). I got mine on ebay, as I couldn't find one locally.
__________________
Tek-Emo Villis Emo Bis V70 SE NAV 1.6 D2 2015MY POWERSHIFT, D4162T, 93000miles, RED. /VOL FCR/PEPER OBD2/Acron 9135 OBD2/L.E.D Flasher/VDASH/ANCEL BA301/Topdon Top Scan |
The Following 2 Users Say Thank You to ShadeTek For This Useful Post: |
May 15th, 2011, 22:46 | #5 |
Swedish Auto Parts
Last Online: Oct 25th, 2020 23:42
Join Date: Feb 2009
Location: portsmouth
|
thank you shadetek
__________________
Visit our website www.swedishautoparts.co.uk Or Call us on 02392179161 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|