940 Estate Towbar Wiring

alansaxman · Apr 8th, 2009, 06:51

Hi

This may be a stupid question, but is there a specific orifice to feed the cables from the sockets through into the back of the car or do I have to drill a new hole. I have a 1997 940 2.3 LPT Classic Estate. Also because the car has a bulb failure device, do I need a special relay. I find conflicting information on the net.

Regards

Alan

Steve940estate · Apr 8th, 2009, 16:40

There are a couple of aluminium bungs on the floor in the bit nearest the rear door. You just prise them out as required. If you are wiring into the socket in the passenger side stowage box you shouldn't need to do anything else. I fitted the basic 7 pin Volvo socket and after sorting the wires out just connected it up.

Apr 8th, 2009, 06:51	#1
alansaxman New Member Last Online: Jul 20th, 2015 14:50 Join Date: Nov 2007 Location: Lincoln	940 Estate Towbar Wiring Hi This may be a stupid question, but is there a specific orifice to feed the cables from the sockets through into the back of the car or do I have to drill a new hole. I have a 1997 940 2.3 LPT Classic Estate. Also because the car has a bulb failure device, do I need a special relay. I find conflicting information on the net. Regards Alan

Apr 8th, 2009, 16:40	#2
Steve940estate Steam Driven PC Owner. Last Online: Jun 11th, 2024 15:05 Join Date: Dec 2004 Location: Not sure.	There are a couple of aluminium bungs on the floor in the bit nearest the rear door. You just prise them out as required. If you are wiring into the socket in the passenger side stowage box you shouldn't need to do anything else. I fitted the basic 7 pin Volvo socket and after sorting the wires out just connected it up.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)