What diameter is the exhaust pipe

[kieran40]

The tube on a diesel is it 2 inch diameter it's quite a biggish pipe anyone know

[v40alex]

My tip is 2 1/4"

[kieran40]

My tip is 2 1/4"

Not the tip so much mate but the actual circumference of the tube before it goes into a box I need to find out so I can order some stainless pieces

[v40alex]

I tried to get under to measure it but the back box is so huge you can't really reach - need to jack the car up to be sure. It looked the same width. If it's just the section before the back box you need, I can go out and have another try?

[v40alex]

Just wriggled under there - 2 1/4" between the back box and the last expansion bottle, it looks the same all the way down.

[kieran40]

Just wriggled under there - 2 1/4" between the back box and the last expansion bottle, it looks the same all the way down.

Thanks Alex you didn't have to go to that hassle but thanks mate, and yes the back box is huge lol

[clarkey1984]

You could always wrap a piece of string around it, mark both ends, then take that measurement and divide it by 3.14 :)

[druid]

You could always wrap a piece of string around it, mark both ends, then take that measurement and divide it by 3.14 :)

Damn your mathematical voodoo.

[kieran40]

You could always wrap a piece of string around it, mark both ends, then take that measurement and divide it by 3.14 :)

I lost the scientific calculator back in 1997 mate lol :)

[GaryS40]

You could always wrap a piece of string around it, mark both ends, then take that measurement and divide it by 3.14 :)

Or just use a vernier calliper and measure the diameter.

Gary

[kieran40]

Or just use a vernier calliper and measure the diameter.

Gary

Youre all too scientific you lot lol

[GaryS40]

Youre all too scientific you lot lol

I take the easy option, every time, Kieran.

Gary