|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
New (to me) 1980 Volvo 244Views : 2041233 Replies : 4092Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 30th, 2020, 10:40 | #1341 |
VOC Member since 1986
Last Online: Yesterday 23:23
Join Date: Jan 2007
Location: Leicestershire
|
OR a group purchase by a number of enthusiasts living in reasonably close proximity (say 10 in a 10 mile radius (?)) might make it more cost-effective, given the limited use that that one person would presumably make of it.
You would only need one person with enough space to house it - the rest could pay him nominal 'rent' of a few beer tokens per year. Told you I was a tight-wad! It comes of being a child of the fifties. Having seen my own mother agonise over spending the last half-crown in her purse at the end of the week on food for the table or coal for the fire, I'd be up for something like that - how about it chaps! Regards, John.
__________________
Time flies like an arrow, fruit flies like a banana ..... |
The Following User Says Thank You to john.wigley For This Useful Post: |
Jun 30th, 2020, 12:25 | #1342 | |
Premier Member
Last Online: Yesterday 22:49
Join Date: May 2012
Location: Lakenheath
|
Quote:
Working those figures back, that means you'd need to find 300 people interested in saving money and changing their own tyres. Out of those 300, 30 will be interested enough to find out more and 10 of those will have everything in place to commit etc. This was borne out by something on another forum, a group purchase of stainless exhaust manifolds for one particular model. The 1:10 was already eliminated and out of the 10-12 initial interests given, only 3 of us (including the one funding the group purchase) were able/willing to commit and that was with two of those taking two manifolds each. The third person dropped out fairly soon after so we were down to two and then found the supplier wasn't willing to offer any discount for buying 6 which the person funding it all was prepared to buy , keep and then sell on later to those whose fortunes had once more improved. As you can guess, it didn't happen! I'm sure you know i'm not saying this to rain on your parade but the big problem, being realistic, is getting enough people interested in the concept to progress things.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Jun 30th, 2020, 13:23 | #1343 |
VOC Member since 1986
Last Online: Yesterday 23:23
Join Date: Jan 2007
Location: Leicestershire
|
I know, 'L.S.', I know. It was ever thus. But wouldn't it be great if it did work? As I sit here listening to the doom and gloom on the radio, especially just up the road in Leicester, I really do need something to cheer me up and think happy thoughts!
Regards, John.
__________________
Time flies like an arrow, fruit flies like a banana ..... |
The Following User Says Thank You to john.wigley For This Useful Post: |
Jun 30th, 2020, 15:59 | #1344 | |
Premier Member
Last Online: Yesterday 22:49
Join Date: May 2012
Location: Lakenheath
|
Quote:
Leicester always struck me as a "cramped" place, everything very close together - perhaps that's supporting/promoting the spread of the Kung Flu as Alan calls it. In fairness i was mainly at Hykeham (North if memory serves) at the landfill site and only saw the town 2-3 times but everything seemed very "cosy" there.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
Jun 30th, 2020, 16:23 | #1345 |
Not an expert but ...
Last Online: Yesterday 09:38
Join Date: Dec 2001
Location: Boncath
|
|
The Following User Says Thank You to Clifford Pope For This Useful Post: |
Jun 30th, 2020, 18:18 | #1346 | |
Premier Member
Last Online: Yesterday 21:17
Join Date: Jan 2020
Location: Skeg Vegas
|
Quote:
I'm thinking: if I buy much cheaper tyres direct from Tyre Leader - I have them delivered to Corby Tyres and pay £25 each to have them fitted and balanced (well worth it for the Porsche, the saving is £60-£100 per tyre). The margins are less for the Skoda and the Royal Barge, but I could probably save £20 and £10 respectively (per wheel). I suppose allowing for a few punctures and some tyres wearing out, I might have an average of about 6 tyres fitted per year - at an average of about £18 - so let's call it £100/year I could save. A new machine would pay for itself in 8 years - and probably have a residual value of half that by the time it was amortised. If I had room I'd probably do it (I'd still have to invest in something to balance the wheels). :-) |
|
Jun 30th, 2020, 20:00 | #1347 |
Premier Member
Last Online: Yesterday 21:17
Join Date: Jan 2020
Location: Skeg Vegas
|
Engine Mounts (part II)
Eagle eyed readers may recall me changing the nearside engine mount last week - it was split in half, an easy job and a great improvement for £6.
The transmission mount arrived with the postie today, the weather was nice and I had nothing else to do, so I decided to fit the offside engine mount and while I had the RB in the air change the transmission mount as well. First the offside engine mount: it looked fiendishly difficult to access, so the same as previously: disconnect the battery, put the car on ramps and fit my lovely home re-purposed engine brace: ... this proved to be really useful, at one point the engine slipped off the jack under the sump, which would have been chaos if not for the brace - it could only fall perhaps 5mm, so all was well. I took the weight of the motor with my bike hoist under the sump via a block of wood, then tightened up the brace to suit. The 3 nuts (17mm) onto the captive studs on the lower bracket come off easily. The 3 bolts fixing the upper bracket to the block were another matter. The first came out easily from underneath the car. The second needed the oil filter removed, but was not too difficult. The final one (lower, front) would have been impossible without removing the alternator. It came off with a 12mm ring spanner - a quarter of a turn at a time. Eventually we got there and the mount plus two brackets could be pulled out. This bit took ages and involved lots of swearing. The old and the new: whilst still complete, the old rubber had the consistency of a bungee cord, was shortened and distorted - the new one was a thing of beauty in comparison. Here is the cleaned up (20 minutes in a bucket of Screwfix degreaser and hot water plus a good scrub) re-assembled mounting - ready to be fitted: ... and here is the offending bolt that was so difficult to remove - it is captive once the rubber bit is fitted: ... I can't imagine why Volvo made that bit so difficult. Another 20 minutes got all the threads started and everything back into place - not so difficult. Once the alternator and oil filter were re-fitted everything could be jacked down. What an improvement - the motor sits about an inch higher than previously - there is now good clearance between the sump and the cross-member. The transmission mount was much easier. I took the weight of the auto box with my bike lift, then removed the 17mm nut holding the back of the mounting with a long socket through the hole Mr Volvo has thoughtfully provided, and loosened the other end with a 17mm ring spanner 1/3 of a turn at a time (very Saabesque - not a compliment). The old rubber block was complete but a bit worse for 40 years of wear: The cross member came off easily enough (4 x 14mm screws i think) and I took the opportunity to give it a clean and brush up before re-assembly: ... a second jack was useful to raise the cross member up into place, but other than that there was nothing unusual to report. This lot ended up taking half as day (punctuated by some tea breaks, Bob's second walk and chatting with the postie), nearly all of which was in getting access to the lower bracket on the offside engine mount. I hope I don't have to do that job again soon. Then the test drive: it was evident even before I got the RB off the ramps that everything was much better - engine shake was greatly reduced and the whole car seemed better. On the road the result was remarkable: no more lump slopping around whenever it felt like it, better gear changes and generally everything felt much tighter. This was a really good £19 spent (the engine mounts were £6 each and the transmission mount was £7). I'm pleased with the outcome. Alan Last edited by Othen; Jun 30th, 2020 at 20:45. |
The Following 3 Users Say Thank You to Othen For This Useful Post: |
Jun 30th, 2020, 22:44 | #1348 | |
Premier Member
Last Online: Yesterday 22:49
Join Date: May 2012
Location: Lakenheath
|
Quote:
That second mount looks very jelly-like, oil contaminated perhaps and turned it to jelly instead of rubber?
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Jun 30th, 2020, 23:32 | #1349 | |
Premier Member
Last Online: Yesterday 21:17
Join Date: Jan 2020
Location: Skeg Vegas
|
Quote:
You are making a profession from these word puns Dave - were you a reporter for the 'Sun' previously? :-) I think you are right - both of the old rubber mounts were much softer than they should have been - maybe oil contamination, maybe just 40 years of vibration? I'm pleased I got all three changed though, the Royal Barge is much better now. Alan |
|
The Following User Says Thank You to Othen For This Useful Post: |
Jun 30th, 2020, 23:50 | #1350 | |
Premier Member
Last Online: Yesterday 22:49
Join Date: May 2012
Location: Lakenheath
|
Quote:
If i was pushed to offer a reason for the state of those engine mounts, i'd say the primary cause was oil contamination aided and abetted by the vibration plus the degradation and perishing of age.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|