|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Taking a +12v feed from front side lights / position lightsViews : 246 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 14th, 2021, 19:31 | #1 |
Senior Member
Last Online: Jul 28th, 2022 12:52
Join Date: Aug 2008
Location: Rugby
|
Taking a +12v feed from front side lights / position lights
Is there anyone familiar with the V70XC 2001 and wiring diagrams who can tell me where to find a good spot to take this and what the wire colour code would be, preferably in the engine bay but not headlight?
__________________
MY 2001 Ocean Race XC70 blue/silver |
Aug 15th, 2021, 19:59 | #2 |
Premier Member
Last Online: Yesterday 23:36
Join Date: Mar 2017
Location: Manchester
|
to use for what purpose?
|
Aug 15th, 2021, 22:08 | #3 |
trying to be helpful
Last Online: Today 01:01
Join Date: Aug 2020
Location: Dagenham
|
doesn't it throw up errors if you take power from lights, I know that was mentioned as a possible issue when I was reading about powering my reversing camera from reversing lights..
Is it not possible to just run one straight from the fusebox and put your own in-line fuse on it.. to avoid causing any unexpected issues depending on application I might think more along the lines of running it from the battery in the back because that way you're already inside the car and running cables to a switch and/or relay will be a piece of cake. Or if you want it switched by ignition I assume you also have the tow-hitch connector by the spare wheel, one of those will do it, I can't remember which is which just test with meter Last edited by stuart bowes; Aug 15th, 2021 at 22:15. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|